Strengthening Trends of Nanovoid Irradiation Defects with Meso-Scale PFDD Modelling
Ashley Roach, University of California, Santa Barbara
Voids of nanoscale dimensions in irradiated metals can act as obstacles to dislocation motion and cause strengthening. In this work, nanovoid strengthening and the influences of void size, void spacing and material properties, such as stacking fault energies, on dislocation bypass mechanisms are investigated using Phase Field Dislocation Dynamics, a three-dimensional mesoscale model that predicts the minimum energy pathway taken by discrete dislocations. A broad range of face centered cubic metals (copper, nickel, silver, rhodium, and platinum) and nanovoid sizes and spacings are treated, altogether spanning void size-to-dislocation stacking fault width ratios from less than unity to ten. Material gamma-surfaces, calculated from ab initio methods, are input directly into the formulation. The analysis reveals that the critical bypass stress scales linearly with the linear void fraction, effective isotropic shear modulus, and ratio of the intrinsic to unstable stacking fault energies. With only a few exceptions, the critical stress is controlled by the stress required for the leading partial to impinge the voids (to move within range of the attractive image stress field of the void). When the void diameter is nearly an order of magnitude greater than the stacking fault width, the mechanism determining critical strength shifts to the stress for the dislocation to breakaway after partially cutting the void. This situation corresponds to that treated by line tension models and is realized here for Pt, with a sub-nanometer stacking fault width.
Authors: Ashley M. Roach1, Shuozhi Xu2, Darby J. Luscher3, Daniel S. Gianola4, Irene J. Beyerlein1,4
1Materials Department, University of California, Santa Barbara, United States
2School of Aerospace and Mechanical Engineering, University of Oklahoma, United States
3Theoretical Division, Los Alamos National Laboratory, United States
4Department of Mechanical Engineering, University of California, Santa Barbara
Abstract Author(s): (see above entries)